Vectron Internationa Logo
Helping Customers Innovate, Improve & Grow
Horizontal shades of blue lines
WIRELESS
Small Cells (Micro, Pico, Femto)
As mobile operators extend service coverage inside a home or building without the need for a cell tower, Femto cells precision oscillator requirements will evolve depending on the application and synchronization requirements. With the emergence of Precision Time Protocol (PTP) utilizing a master clock in the network providing a timing reference to the slave clocks at the Femto access points, Vectron oscillators will continue to provide the heartbeat of the next generation network. Our continued innovations in crystal design and power consumption will allow the industry to continue to meet its high standards.

OCXO   TCXO   VCSO   VCXO   STD XO  

Oven Controlled Crystal Oscillators (OCXO)
Show All OCXO products >>
Product Crystal
Cut
Frequency
Range
(MHz)
Output Supply Aging Temperature
Stabilities to
–40°C to +85°C
Features
OX-400
(formerly C4400)

13.2 x 20.8 x 10.2 mm
DIP 14
AT 10 to 160 HCMOS,
3.3V & 5V
< ± 300ppb/year
< ± 2.5ppm/10years
10ppb - TCXO Replacement for Enhanced Performance
SC 10 to 52 HCMOS,
3.3V & 5V
< ± 100ppb/year
< ± 700ppb/10years
OX-220
(formerly C4530)

22.0 x 25.4 x 12.1 mm
DIP 14
AT 10 to 160 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 300ppb/year
< ± 2.5ppm/10years
5ppb - Low Aging
- Low Phase Noise
SC 10 to 40 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 100ppb/year
< ± 500ppb/10years
OX-200
(formerly C4550)

25.4 x 25.4 x 11.2 mm
DIP 14
AT 10 to 100 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 250ppb/year
< ± 2.0ppm/10years
10ppb - Low Aging
- Good Close in Phase Noise
- -165 dBc/Hz Phase Noise Floor
SC 10 to 100 HCMOS/Sinewave,
3.3V, 5V, 12V
< ± 100ppb/year
< ± 500ppb/10years
OX-203

25.4 x 25.4 x 13.4
SC 5 to 20 CMOS/Sinewave <± 0.15ppb day/year 0.15ppb - High stability
- Small form factor
- Designed to support Holdover of 8us over 24 hours
- Specifically designed for inter-operability with existing designs based on conventional OCXO’s
- Advanced digital compensation techniques take place inside the Holdover Reference - no need for programming or other user intervention
top of page

Temperature Controlled Crystal Oscillators (TCXO)
Show All TCXO products >>
Product Frequency
Range
(MHz)
Output Logic Temperature
Stabilities to
–40°C to +85°C
Features
TX-704

5 x 7 x 1.8 mm
SMD
6.4 to 35Clipped Sinewave,
HCMOS
0.14ppm - Excellent Temperature Stability
- Stratum 3 Compliant
VT-803

3.2 x 5 x 1.5 mm
SMD
10 to 52Clipped Sinewave
CMOS
200ppb - Temp Stability: 200ppb over -40°C to +85°C
- Aging: <0.5ppm / year
- Excellent Phase Noise
TX-502

9 x 14 x 5.9 mm
SMD
6.4 to 35HCMOS 100ppb - OCXO Performance: –20 to 70°C; 50ppb
- Low Power Consumption
top of page

Voltage Controlled SAW Oscillator (VCSO)
Show All VCSO products >>
Product Frequency
Range
(MHz)
Output Supply Features
VS-702
(formerly VS-720)

5 X 7.5 X 2.0 mm
6 PIN SMD
150-1000LVPECL,
LVDS,
Single Frequency
- Discrete PLL VCXO with Jitter Performance less than 120fs rms jitter
top of page

Voltage Controlled Crystal Oscillators (VCXO)
Show All VCXO products >>
Product Frequency
Range
(MHz)
Output Logic Features
VX-700
(formerly VC-710)

5 X 7 X 1.8 mm
SMD
80 to 200LVEPCL - Discrete PLL VCXO with Jitter Performance less than 120fs rms jitter
VX-501
(formerly C5310)

14.5 X 9.5 X 5.9 mm
SMD
1 to 700HCMOS,
PECL,
LVDS,
LVPECL,
Sinewave
- Tight Stabilities
- High Frequency Outputs
- Low Phase Noise
top of page

Crystal Oscillators (XO)
Fundamental/3rd Overtone

PLL Crystal Oscillator


NEW Parametric Search


Show All XO products >>

Product Frequency
Range
(MHz)
Output Logic Features
VC-708

5.0 x 7.0 x 1.8 mm
6 PIN SMD
20 to 250LVPECL,
LVDS
- 47 fs RMS jitter typcial 12kHz-20MHz
- Ultra Low Jitter Performance, 3rd OT Crystal Design
VCC6
(formerly VCC6-Q/R
VCC6-L/V
VCC6-107)

5 X 7 X 1.8 mm
6 PIN SMD
10 to 312.50LVPECL,
LVDS
- Reference clocks with jitter <300 fs RMS
VCC1

5 X 7 X 1.8 mm
4 PIN SMD
1.544 to 190TTL,
CMOS
- Reference clocks with jitter <250 fs RMS
top of page